Development Platform for LPC2214

sku: DEV-00261

Description: Feature-filled development board for the LPC2214 processor. Includes FTDIUSB<->RS232 Interface, Ethernet, RS232, SRAM, Flash Memory, and much more!

• MCU: LPC2214 16/32 bit ARM7TDMI with 256K Bytes ProgramFlash, 16K Bytes RAM, EXTERNAL MEMORY BUS, RTC,4x 10 bit ADC 2.44 uS, 2x UARTs,I2C, SPI, 2x 32bit TIMERS, 7x CCR, 6x PWM, WDT, 5V tolerant I/O, up to 60MHzoperation
• Standard JTAG connector with ARM 2x10 pin layout for programming/debuggingwith ARM-JTAG
• Optional ETM connector (not installed)
• 1MB (256Kx32bit) 12 ns 71V416 SRAM
• 1MB (512Kx16bit) 55ns MX26LV800BTC FLASH
• Standard JTAG connector with ARM 2x10 pin layout for programming/debuggingwith ARM-JTAG
• USB to RS232 converter, board can take power only from USB port
• RESET circuit with external control of Philips ISP utility via USB-RS232virtual port
• Jumpers for boot select from external memory
• Jumpers for ISP/RUN mode
• Ethernet controller with CS8900A and RJ45 connector
• LCD 16x2 with LED Backlight
• 2 Buttons
• TrimPot connected to ADC
• SPI connector
• RS232 driver and connector
• Dallas i-BUTTON interface and connector
• I2C 24LC515 EEPROM on board
• Two on board voltage regulators 1.8V and 3.3V with up to 800mA current

Dimensions: 3.9x6.7" (100x170mm)
Documents: LPC-E2214 Schematic
Software: TestRoutines