WiShield 1.0

This is the shield you need to get Wi-Fi connectivity to your Arduino-based project! This shield provides 802.11b connectivity and is a direct drop-on plug-and-play solution to your Arduino Diecimila/Duemilanove. The WiShield matches the aforementioned Arduino perfectly, even down to the color. WiShield provides the following benefits: Shield Features <ul> <li>Add-on shield built for Arduino Diecimila and Duemilanove</li> <li>Dimensions, shape, even color match exactly!</li> <li>True plug-n-play solution</li> <li>9-pin breakout header (not populated) for use in breadboard applications</li> <li>Uses SPI for host communication (max speed 25MHz)</li> <li>All Arduino headers brought out for easy access</li> <li>Easy access reset button on-board</li> <li>On-board PCB antenna</li> <li>Switchable interrupt pin usage between INT0 (port D, pin 2) and digital pin 8 (port B, pin 0)</li> <li>Switchable LED on digital pin 9 (port B, pin 1)</li> </ul> Wi-Fi Module Features <ul> <li>802.11b Wi-Fi certified</li> <li>1Mbps and 2Mbps throughput speeds</li> <li>Supports both infrastructure (BSS) and ad hoc (IBSS) wireless networks</li> <li>Ability to create secured and unsecured networks</li> <li>WEP (64-bit and 128-bit)</li> <li>WPA/WPA2 (TKIP and AES) PSK</li> <li>Low power usage</li> <li>Standby mode: 250μA</li> <li>Transmit: 165mA</li> <li>Receive: 85mA</li> </ul> Pin Usage <ul> <li>SPI</li> <li>Slave select (SS) : Arduino pin 10 (port B, pin 2)</li> <li>Clock (SCK) : Arduino pin 13 (port B, pin 5)</li> <li>Master in, slave out (MISO) : Arduino pin 12 (port B, pin 4)</li> <li>Master out, slave in (MOSI) : Arduino pin 11 (port B, pin 3)</li> <li>Interrupt (Uses only one of the following, depending on jumper setting)</li> <li>INT0 : Arduino pin 2 (port D, pin 2)</li> <li>DIG8 : Arduino pin 8 (port B, pin 0)</li> <li>LED : Arduino pin 9 (port B, pin 1)</li> <li>To regain use of this pin, remove the LED jumper cap</li> <li>5V power</li> <li>GND</li> </ul> More information on the software and hardware can be found on the <a href="http://asynclabs.com/wiki">AsyncLabs Wiki</a> . Note that by using the WiShield hardware, you are accepting all terms of use in the license agreement for the software. For more information, please visit the following: <a href="http://asynclabs.com/wiki/index.php?title=WiShield_1.0_Driver">WiShield 1.0 Driver</a> .

2009-06-17T02:52:47+10:00

wishield-1-0 7107552

Breakout Board

2009-06-17T02:52:47+10:00

WiShield 1.0

2009-11-24T09:17:53+11:00

ASync Labs This is the shield you need to get Wi-Fi connectivity to your Arduino-based project! This shield provides 802.11b connectivity and is a direct drop-on plug-and-play solution to your Arduino Diecimila/Duemilanove. The WiShield matches the aforementioned Arduino perfectly, even down to the color. WiShield provides the following benefits: *Shield Features* * Add-on shield built for Arduino Diecimila and Duemilanove * Dimensions, shape, even color match exactly! * True plug-n-play solution * 9-pin breakout header (not populated) for use in breadboard applications * Uses SPI for host communication (max speed 25MHz) * All Arduino headers brought out for easy access * Easy access reset button on-board * On-board PCB antenna * Switchable interrupt pin usage between INT0 (port D, pin 2) and digital pin 8 (port B, pin 0) * Switchable LED on digital pin 9 (port B, pin 1) *Wi-Fi Module Features* * 802.11b Wi-Fi certified * 1Mbps and 2Mbps throughput speeds * Supports both infrastructure (BSS) and ad hoc (IBSS) wireless networks * Ability to create secured and unsecured networks * WEP (64-bit and 128-bit) * WPA/WPA2 (TKIP and AES) PSK * Low power usage * Standby mode: 250μA * Transmit: 165mA * Receive: 85mA *Pin Usage* * SPI * Slave select (SS) : Arduino pin 10 (port B, pin 2) * Clock (SCK) : Arduino pin 13 (port B, pin 5) * Master in, slave out (MISO) : Arduino pin 12 (port B, pin 4) * Master out, slave in (MOSI) : Arduino pin 11 (port B, pin 3) * Interrupt (Uses only one of the following, depending on jumper setting) * INT0 : Arduino pin 2 (port D, pin 2) * DIG8 : Arduino pin 8 (port B, pin 0) * LED : Arduino pin 9 (port B, pin 1) * To regain use of this pin, remove the LED jumper cap * 5V power * GND More information on the software and hardware can be found on the "AsyncLabs Wiki":http://asynclabs.com/wiki . Note that by using the WiShield hardware, you are accepting all terms of use in the license agreement for the software. For more information, please visit the following: "WiShield 1.0 Driver":http://asynclabs.com/wiki/index.php?title=WiShield_1.0_Driver .

88.95

2009-06-17T02:52:48+10:00

manual

50 20085302

shopify

deny

Default 1 62.00

7107552

true

ASync0001 true Default

2010-03-09T12:10:24+11:00

2009-09-27T08:59:26+10:00

18893292 3

7107552

2009-09-27T08:59:26+10:00

http://cdn.shopify.com/s/files/1/0031/5472/products/ASYNC0001.jpg?1268127844